Leonard LI1310X User Manual download pdf (Page 27)

5. Remove the flat filter (C) from the bot-

tom of the appliance.

6. Clean the filters below running water.

7. Put the flat filter (C) to its initial position.

Make sure that it assembles correctly

under the two guides (D).

8. Put the coarse filter (A) in the microfilter

(B) and push the filters together.

9. Put the filter system in position.

10. To lock the filter system, turn the han-

dle on the microfilter (B) clockwise until

it locks in position.

To clean the spray arms

Do not remove the spray arms.

If the holes in the spray arms become clog-

ged, remove remaining parts of soil with a

thin pointed object.

To clean the external surfaces

Clean the external surfaces of the appliance

and control panel with a moist soft cloth.

Only use neutral detergents.

Do not use abrasive products, abrasive

cleaning pads or solvents (acetone).

WHAT TO DO IF…

The start of the appliance does not occur or

it stops during operation.

First try to find a solution to the problem (re-

fer to the table). If not, contact the service

centre.

With some malfunctions the indicators

flash to show an alarm code.

Alarm code Malfunction

• The start/cancel indicator flashes continuously.

• The end indicator flashes one time intermittently.

The appliance does not fill with water.

• The start/cancel indicator flashes continuously.

• The end indicator flashes two times intermittently.

The appliance does not drain the water.

• The start/cancel indicator flashes continuously.

• The end indicator flashes three times intermittently.

The anti-flood device is on.

Warning! Deactivate the appliance

before you do the checks.

Malfunction Possible cause Possible solution

The appliance does not fill with

water.

The water tap is blocked or

there is limescale on it.

Clean the water tap.

The water pressure is too low. Contact your local water au-

thority.

The water tap is closed. Open the water tap.

The filter in the water inlet hose

is blocked.

Clean the filter.

The connection of the water in-

let hose is not correct.

Make sure that the connection

is correct.

The water inlet hose is dam-

aged.

Make sure that the water inlet

hose has no damages.

The appliance does not drain

the water.

There is a blockage in the sink

spigot.

Clean the sink spigot.

leonard 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Comments to this Manuals

No comments

Leonard LI1310X User Manual Page 27

Comments to this Manuals

Related products and manuals for Dishwashers Leonard LI1310X